The Xcessive SR20VE Bolt on Plenum Kit (P11 oval port)
The plenum is reversible for use on front wheel drive cars where the throttle body needs to face the other direction. The new plenum is permanent mold cast for superior finish and casting soundness with a phenolic shell core used for internal walls to yield some of the best quality available. The plenum is drilled for the factory throttle body and bolt pattern but comes pre machined for up to a 70 mm bore: $339

Godspeed S14 SR20DET Upper Intake Manifold
Flows 20% more air for higher RPM horsepower: $140

S13 SR20DET intake manifold, great for more power and needed for over 400HP. Factory fuel rail and throttle body fit this as well: $150

Greddy S13 Manifold which also alows the use of the JGY fuel rail: only $532

Greddy Intake manifold for S14 SR. Replaces both upper and lower plenum's and alows the use of the JGY fuel Rail: $608.40

Need a custom intake? Need a huge flange on your Greddy intake? Here's a custom Q45 flange tig welded to the Greddy manifold and port matched.

JGY S13 Intake Kit, Bead Rolled, Hand Polished, 2.5 inch Aluminum: $55

Want an upgraded air path going to your turbo? Samco has the answer. These wonderful hoses replace that icky stock pathway and replace some of the air tubes from the valve cover. These are for S13's or S14's with the S13 motor. We stock blue, but other colors are available. List is $243, our price: $199

Jim Wolf Technology POP Charger (specifically for the 300zx MAF)
These are known for the power adding properties. By utilizing a special venturi inlet, it aids in adding power. It features a reusable/oilable low restriction air filter element as well. BONUS part is that if you are running a 300zx MAF, now you have the solution to the forever going problem - where to find a MAF adaptor plate... This kit includes the adaptor with built in venturi, clamp, bolts, and air filter.
JGY price: $110

Tomei 300zx MAF Plug adaptor, great for any application running a Z32 MAF: $29

300ZX MAF, great for power upgrades above 250HP, we sell only real Nissan Z32 MAFs, they meter the air the best: $199

SR DE and DET High Port Intake Manifold Gasket: $15

Sikky Thermalnator Intake Manifold Spacer for S13 SR
Thermalnator is a unique high temperature shielding gasket which replaces the stock intake manifold gasket. Thermalnator’s cooling properties reduce heat by stopping metal to metal contact between the intake manifold and the engine block. By using a Thermalnator gasket, you will reduce the heat of the air entering your engine, making up to 5% more power. JGY price: $36

Sikky Thermalnator Intake Manifold Spacer for S14 SR
Thermalnator is a unique high temperature shielding gasket which replaces the stock intake manifold gasket. Thermalnator's cooling properties reduce heat by stopping metal to metal contact between the intake manifold and the engine block. By using a Thermalnator gasket, you will reduce the heat of the air entering your engine, making up to 5% more power. JGY price: $36

JGY air filter, includes aluminum MAF adaptor plate for SR/KA/300zx MAFS: $34

Little Air Filter - Great for valve cover, Available in blue or yellow: $5

Air Filter, Cone Style - with aluminum 300Z adapter plate: $40

Greddy S13 air filter kits (AIRINX) Yellow or Blue: $76.44

Foam filter kit with MAF adapter plate: $25